Technical Service Contracts

Our service just begins when the installation is complete. We offer on-line support for the life of your system, and have a variety of maintenance contracts tailored to your specific needs. A typical preventative maintenance visit includes the following:

1. Confirm proper automatic operation of all system components and processes. Make necessary adjustments as required. Document all adjustments and bring them to the attention of the operating personnel.
2. Review log with operators, noting trends or changes in operation.
3. Check all chemical feed loops for proper operation and set specific gravity for the system.
4. Inspect, clean and calibrate all sensors and process instrumentation.
5. Inspect all automatic valves for proper operation and service as required.
6. Depressurize, disassemble and inspect Kinetico valve modules. If necessary, replace any Kinetico valve module parts, pawls, seals, valve seats or gearing.
7. Inspect all motor-driven and rotating devices for proper operation and service as required per manufacturer specifications.
8. Open and inspect all resin tanks. Perform resin analysis (once per year) and report findings.
9. Repack all tanks as necessary.
10. Reassemble system and perform pressure test.
11. Check reagent storage and supply. Notify responsible party if reagents need replenishment.
12. Inspect all compressed air line valves, regulators, oilers, etc. associated with the Kinetico system for proper operation. Service as required.
13. Inspect area floor sump pumps for proper operations. Check operation of all transfer pumps.
14. Inspect the system control and motor starter panels for proper operation and service as required. Make any necessary changes to the process controller (PLC).